Updated Jan 01, 2025 Verified 300-730 dumps Q&As - 100% Pass
New 2025 Latest Questions 300-730 Dumps - Use Updated Cisco Exam
Cisco 300-730 certification exam covers a wide range of topics, including VPN technologies, Cisco Secure VPN solutions, remote access VPN, site-to-site VPN, clientless SSL VPN, AnyConnect SSL VPN, and FlexVPN. Candidates are expected to have a deep understanding of these topics and possess the skills required to implement these solutions in real-world scenarios. Implementing Secure Solutions with Virtual Private Networks certification exam is ideal for individuals who want to demonstrate their expertise in VPN technologies and Cisco VPN solutions and advance their careers as network security professionals.
NEW QUESTION # 73
Refer to the exhibit.
An engineer has configured a spoke to connect to a FlexVPN hub. The tunnel is up, but pings fail when the engineer attempts to reach host 192.168.200.10 behind the spoke, and traffic is sourced from host 192.168.100.3, which is behind the FlexVPN server. Based on packet captures, the engineer discovers that host 192.168.200.10 receives the icmp echo and sends an icmp reply that makes it to the inside interface of the spoke. Based on the output in the exhibit captured on the spoke by the engineer, which action resolves this issue?
- A. Add the route set remote ipv4 192.168.100.0 255.255.255.0 command to the spoke authorization policy.
- B. Add the aaa authorization group cert list default default command to the spoke ikev2 profile.
- C. Add the aaa authorization group cert list default default command to the hub ikev2 profile.
- D. Add the route set remote ipv4 192.168.200.0 255.255.255.0 command to the hub authorization policy.
Answer: A
NEW QUESTION # 74
Which redundancy protocol must be implemented for IPsec stateless failover to work?
- A. HSRP
- B. SSO
- C. GLBP
- D. VRRP
Answer: A
Explanation:
Section: Secure Communications Architectures
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security-vpn/ipsec-negotiation-ike- protocols/17826-ipsec-feat.html
NEW QUESTION # 75
Drag and drop the correct commands from the night onto the blanks within the code on the left to implement a design that allow for dynamic spoke-to-spoke communication. Not all comments are used.
Answer:
Explanation:
NEW QUESTION # 76
Refer to the exhibit.
The DMVPN tunnel is dropping randomly and no tunnel protection is configured. Which spoke configuration mitigates tunnel drops?
- A. Option A
- B. Option B
- C. Option D
- D. Option C
Answer: C
NEW QUESTION # 77
Refer to the exhibit.
Given the output of the show ip route command, which remote access VPN technology is in use?
- A. FlexVPN
- B. Dynamic Crypto Map
- C. Reverse Route Injection
- D. DMVPN
Answer: A
Explanation:
https://www.cisco.com/en/US/docs/ios-xml/ios/sec_conn_ike2vpn/configuration/15-2mt/sec-flex-spoke.html
NEW QUESTION # 78
Under which section must a bookmark or URL list be configured on a Cisco ASA to be available for clientless SSLVPN users?
- A. tunnel-group (webvpn-attributes)
- B. webvpn (global configuration)
- C. tunnel-group (general-attributes)
- D. webvpn (group-policy)
Answer: D
NEW QUESTION # 79
Refer to the exhibit. A Cisco ASA is configured as a client to a router running as a FlexVPN server. The router is configured with a virtual template to terminate FlexVPN clients. Traffic between networks 192.168.0.0/24 and 172.16.20.0/24 does not work as expected. Based on the show crypto ikev2 sa output collected from the Cisco ASA in the exhibit, what is the solution to this issue?
- A. Modify the crypto ACL on the ASA to permit network 192.168.0.0/24 to network 172.16.20.0/24.
- B. Modify the crypto ACL on the router to permit network 192.168.0.0/24 to network 172.16.20.0/24.
- C. Modify the crypto ACL on the router to permit network 172.16.20.0/24 to network 192.168.0.0/24.
- D. Modify the crypto ACL on the ASA to permit network 172.16.20.0/24 to network 192.168.0.0/24.
Answer: A
Explanation:
The show crypto ukev2 sa output from the ASA, the local selector is 192.168.0.0/24 the remote selector is 172.16.2.0/24 ( which is wrong, should be .20.0/24) . so, the ACL in the ASA should be to permit 192.168.0.0/24 to 172.16.20.0/24.
NEW QUESTION # 80
Refer to the exhibit.
A network engineer is reconfiguring clientless SSLVPN during a maintenance window, and after testing the new configuration, is unable to establish the connection. What must be done to remediate this problem?
- A. Enable client services on the outside interface.
- B. Enable clientless protocol under the group policy.
- C. Enable DTLS under the group policy.
- D. Enable auto sign-on for the user's IP address.
Answer: B
NEW QUESTION # 81
Refer to the exhibit. Based on the configuration output, what is the VPN technology?
- A. site-to-site
- B. multicast VPN
- C. L2VPN
- D. DMVPN
Answer: C
NEW QUESTION # 82
In a FlexVPN deployment, the spokes successfully connect to the hub, but spoke-to-spoke tunnels do not form. Which troubleshooting step solves the issue?
- A. Verify that the tunnel interface is contained within a VRF.
- B. Verify the spoke configuration to check if the NHRP redirect is enabled.
- C. Verify the hub configuration to check if the NHRP shortcut is enabled.
- D. Verify that the spoke receives redirect messages and sends resolution requests.
Answer: D
NEW QUESTION # 83
Which technology works with IPsec stateful failover?
- A. HSRP
- B. GLBR
- C. GRE
- D. VRRP
Answer: A
Explanation:
Section: Secure Communications Architectures
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios/12_2/12_2y/12_2yx11/feature/guide/ ft_vpnha.html#wp1122512
NEW QUESTION # 84
Refer to the exhibit. Which type of mismatch is causing the problem with the IPsec VPN tunnel?
- A. transform set
- B. crypto access list
- C. Phase 1 policy
- D. preshared key
Answer: D
Explanation:
https://www.cisco.com/c/en/us/support/docs/security-vpn/ipsec-negotiation-ike-protocols/5409- ipsec-debug-00.html#ike
NEW QUESTION # 85
An engineer is implementing the FlexVPN solution on a Cisco IOS router. The router must only terminate VPN requests and must not initiate them. Additionally, the interface must support VPNs from other routers and Cisco AnyConnect connections. Which interface type must be configured to meet these requirements?
- A. multipoint GRE tunnel interface
- B. point-to-point GRE tunnel interface
- C. virtual template interface
- D. static virtual tunnel interface
Answer: C
Explanation:
The correct interface type to meet these requirements is the virtual template interface. This interface allows for the creation of multiple virtual access interfaces, which can be used for various types of remote access VPN connections, including site-to-site and AnyConnect VPNs.
The virtual template interface can be configured to terminate VPN requests from other routers and allow for dynamic creation of VPN sessions, while also supporting AnyConnect VPN connections.
NEW QUESTION # 86
Refer to the exhibit. A network administrator is setting up a phone VPN on a Cisco ASA. The phone cannot connect and the error is presented in a debug on the Cisco ASA. Which action fixes this issue?
- A. Configure the Cisco ASA to present an RSA certificate to the phone for authentication.
- B. Install the posture module on the Cisco ASA.
- C. Enable web-deploy of the posture module so that the module can be downloaded from the Cisco ASA to an IP phone.
- D. Disable Cisco Secure Desktop under the connection profile VPNPhone.
Answer: D
Explanation:
CSD and IP phones: Currently, IP phones do not support Cisco Secure Desktop (CSD) and do not connect when CSD is enabled for the tunnel group or globally in the ASA.
NEW QUESTION # 87
Refer to the exhibit. Which component must be configured on routers for a GETVPN deployment work properly?
- A. PE3: Key Server - all CEs: Group Members
- B. PE3: Key Server - Customer 2 CEs: Group Members
- C. Customer 1 CE1: Key Server - R1 and Customer 1 CE2: Group Members
- D. R1: Key Server - Customer 1 CEs: Group Members
Answer: B
NEW QUESTION # 88
......
Cisco 300-730 certification exam is designed for IT professionals who specialize in network security and virtual private networks (VPNs). 300-730 exam measures the candidate's knowledge and skills in implementing secure solutions with VPNs, specifically using Cisco technologies. 300-730 exam covers various topics such as secure communications, access control, and security policies.
Latest 300-730 Exam Dumps Cisco Exam from Training: https://examtests.passcollection.com/300-730-valid-vce-dumps.html
