[2024] Earn Quick And Easy Success With 300-730 Dumps
Free 300-730 pdf Files With Updated and Accurate Dumps Training
Career Bonuses
After taking the Cisco 300-730 test along with the core exam, the candidates can earn the CCNP Security certification. The specialists with this certificate have a wide range of career opportunities to explore. Various organizations are looking to hire the reliable security professionals to protect their enterprises from cyber threats. Some of the positions that the individuals with this certification can take up include an IT Network Specialist, an IT Security Consultant, a Cybersecurity Specialist, a Network Security Specialist, an Infrastructure Engineer, a Network Engineer, a Network Administrator, and a Network Engineer, among others. The average remuneration outlook for the certificate holders is $100,000 per annum.
NEW QUESTION # 12
Refer to the exhibit.
An engineer is troubleshooting a new GRE over IPsec tunnel. The tunnel is established but the engineer cannot ping from spoke 1 to spoke 2. Which type of traffic is being blocked?
- A. ISAKMP packets from spoke1 to spoke2
- B. ESP packets from spoke2 to spoke1
- C. ESP packets from spoke1 to spoke2
- D. ISAKMP packets from spoke2 to spoke1
Answer: B
NEW QUESTION # 13
An organization wants to implement a site-to-site VPN solution that must be able to support 350 sites with direct communications between all sites, fully encrypt the packet header and payload, and support propagation of routing information over IPsec. Which solution meets these requirements?
- A. GETVPN
- B. DMVPN
- C. FlexVPN
- D. IPsec full mesh
Answer: C
Explanation:
https://networklessons.com/cisco/ccie-enterprise-infrastructure/flexvpn-ikev2-routing
NEW QUESTION # 14
Which IKE identity does an IOS/IOS-XE headend expect to receive if an IPsec Cisco AnyConnect client uses default settings?
- A. *$RemoteAccessVpnClient$*
- B. *$SecureMobilityClient$*
- C. *$AnyConnectClient$*
- D. *$DfltlkeldentityS*
Answer: C
Explanation:
Section: Remote access VPNs
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security/flexvpn/200555-FlexVPN-AnyConnect- IKEv2-Remote-Access.html
NEW QUESTION # 15
An administrator is setting up a VPN on an ASA for users who need to access an internal RDP server. Due to security restrictions, the Microsoft RDP client is blocked from running on client workstations via Group Policy. Which VPN feature should be implemented by the administrator to allow these users to have access to the RDP server?
- A. clientless rewriter
- B. clientless proxy
- C. clientless plug-in
- D. smart tunneling
Answer: C
NEW QUESTION # 16
Which method dynamically installs the network routes for remote tunnel endpoints?
- A. policy-based routing
- B. reverse route injection
- C. CEF
- D. route filtering
Answer: B
Explanation:
Reference:
<https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_vpnav/configuration/12-4t/sec-vpn- availability-12-4t-book/sec-rev-rte-inject.html>
NEW QUESTION # 17
Drag and drop the GETVPN components from the left onto the descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 18
Which two protocols does DMVPN leverage to build dynamic VPNs to multiple destinations? (Choose two.)
- A. mGRE
- B. mBGP
- C. IKEv2
- D. GDOI
- E. NHRP
Answer: A,E
NEW QUESTION # 19
A network administrator is troubleshooting a FlexVPN tunnel. The hub router is unable to ping the spoke router's tunnel interface IP address of 192.168.1.2, even though the tunnel is showing up. The output of the debug ip packet CLI command on the hub router shows the following entry.
IP: tableid=0123456789 s=192.168.1.1 (local), d=192.168.1.2 (loopback2), routed via FIB.
What must be configured to fix this issue?
- A. An IKEv2 authorization policy must be configured on the spoke router to advertise the interface route.
- B. An outbound ACL on the dynamic VTI of the hub router that allows ICMP traffic to 192.168.1.2.
- C. A matching IKEv2 pre-shared key on the hub and spoke routers in the crypto keyring configuration.
- D. A route map must be configured on hub router to set the next hop for 192.168.1.2 to the dynamic VTI.
Answer: A
NEW QUESTION # 20
An administrator must guarantee that remote access users are able to reach printers on their local LAN after a VPN session is established to the headquarters. All other traffic should be sent over the tunnel. Which split-tunnel policy reduces the configuration on the ASA headend?
- A. include specified
- B. dynamic exclude
- C. exclude specified
- D. tunnel specified
Answer: C
Explanation:
You could in theory "tunnel specified" and list every subnet aside from the local one in the split tunnel list, but that is cumbersome and clearly not the best answer from the "reduce the configuration" requirement. Exclude only the local subnet and continue with your day.
NEW QUESTION # 21
Which two types of web resources or protocols are enabled by default on the Cisco ASA Clientless SSL VPN portal? (Choose two.)
- A. CIFS
- B. RDP
- C. VNC
- D. ICA (Citrix)
- E. HTTP
Answer: A,B
NEW QUESTION # 22
Refer to the exhibit.
Upon setting up a tunnel between two sites, users are complaining that connections to applications over the VPN are not working consistently. The output of show crypto ipsec sa was collected on one of the VPN devices. Based on this output, what should be done to fix this issue?
- A. Make an adjustment to IPSec replay window.
- B. Specify the application networks in the remote identity.
- C. Enable perfect forward secrecy.
- D. Lower the tunnel MTU.
Answer: D
NEW QUESTION # 23
Refer to the exhibit.
Which type of VPN is being configured, based on the partial configuration snippet?
- A. FlexVPN backup gateway
- B. FlexVPN load balancer
- C. GET VPN with dual group member
- D. GET VPN with COOP key server
Answer: D
NEW QUESTION # 24
An engineer has configured Cisco AnyConnect VPN using IKEv2 on a Cisco IOS router. The user cannot connect in the Cisco AnyConnect client, but receives an alert message "Use a browser to gain access." Which action does the engineer take to resolve this issue?
- A. Disable the HTTP server.
- B. Reset user login credentials.
- C. Connect using HTTPS.
- D. Correct the URL address.
Answer: A
Explanation:
https://www.cisco.com/c/en/us/support/docs/security/flexvpn/115755-flexvpn-ike-eap-00.html
NEW QUESTION # 25
An engineer is troubleshooting a new DMVPN setup on a Cisco IOS router. After the show crypto isakmp sa command is issued, a response is returned of "MM_NO_STATE." Why does this failure occur?
- A. The ISAKMP policy priority values are invalid.
- B. The Phase 1 policy does not match on both devices.
- C. Tunnel protection is not applied to the DMVPN tunnel.
- D. ESP traffic is being dropped.
Answer: B
Explanation:
https://www.cisco.com/c/en/us/support/docs/security/dynamic-multipoint-vpn-dmvpn/111976-dmvpn-troubleshoot-00.html The MMNOSTATE failure occurs when the ISAKMP policy priority values are not configured correctly on both devices. The ISAKMP policy priority values are used to determine the order in which the ISAKMP policies are applied. If the priority values do not match between the two devices, the ISAKMP tunnel may not be established correctly, resulting in the MMNOSTATE failure. To resolve this issue, the engineer should ensure that the ISAKMP policy priority values are configured correctly on both the router and the peer.
NEW QUESTION # 26
Which technology is used to send multicast traffic over a site-to-site VPN?
- A. GRE over IPsec on IOS router
- B. GRE over IPsec on FTD
- C. GRE tunnel on ASA
- D. IPsec tunnel on FTD
Answer: A
Explanation:
https://www.cisco.com/c/en/us/support/docs/security-vpn/ipsec-negotiation-ike-protocols/216276-configure-route-based-site-to-site-vpn-t.html#anc6
NEW QUESTION # 27
Refer to the exhibit.
Based on the configuration output, what is the VPN technology?
- A. site-to-site
- B. DMVPN
- C. multicast VPN
- D. L2VPN
Answer: B
Explanation:
https://www.cisco.com/c/en/us/support/docs/security-vpn/ipsec-negotiation-ike-protocols/14122-24.html#configs
NEW QUESTION # 28
Refer to the exhibit.
An engineer must allow Cisco AnyConnect users to access the outside interface using protocol UDP 500/4500. In addition, these clients must be able to establish an SSL connection to update Cisco AnyConnect software over the same connection. Which two actions must be taken to achieve this goal? (Choose two.)
- A. IPsec (IKEv2) Allow Access must be checked on the outside interface.
- B. Bypass interface access lists for inbound VPN sessions must be unchecked.
- C. SSL Allow Access must be checked on the outside interface.
- D. IPsec (IKEv2) Enable Client Services must be checked on the outside interface.
- E. SSL Enable DTLS must be checked on the outside interface.
Answer: A,D
NEW QUESTION # 29
Refer to the exhibit.
What is configured as a result of this command set?
- A. FlexVPN server for an IPv6 dVTI session
- B. FlexVPN client profile for IPv6
- C. FlexVPN server to authenticate IPv6 peers by using EAP
- D. FlexVPN server to authorize groups by using an IPv6 external AAA
Answer: A
Explanation:
https://www.cisco.com/c/en/us/support/docs/security/flexvpn/116528-config-flexvpn-00.html
NEW QUESTION # 30
Refer to the exhibit.
Which type of mismatch is causing the problem with the IPsec VPN tunnel?
- A. transform set
- B. preshared key
- C. Phase 1 policy
- D. crypto access list
Answer: B
NEW QUESTION # 31
In order to enable FlexVPN to use a AAA attribute list, which two tasks must be performed? (Choose two.)
- A. Verify that clients are using the correct authorization policy.
- B. Set the maximum segment size.
- C. Define the RADIUS server.
- D. Assign the list to an authorization policy.
- E. Define the AAA server.
Answer: A,D
Explanation:
https://www.cisco.com/c/en/us/support/docs/security/flexvpn/116032-flexvpn-aaa-config-example-00.html
NEW QUESTION # 32
......
Real Updated 300-730 Questions Pass Your Exam Easily: https://examtests.passcollection.com/300-730-valid-vce-dumps.html
