Verified 300-435 Dumps Q&As - 300-435 Test Engine with Correct Answers
Pass Your 300-435 Dumps as PDF Updated on 2024 With 125 Questions
NEW QUESTION # 58
Refer to the exhibit.
NTP server 10.1.1.20 must be configured on the target Cisco IOS XE device without using
authentication and logging. Which state should be added on a new line at the end of the Ansible task?
- A. state: started
- B. state: present
- C. state: installed
- D. state: true
Answer: B
NEW QUESTION # 59
Refer to the exhibit.
An engineer needs to remove the device with serialQ134_06776318 FROM THE NETWORK 'ENAUTO by utilizing Meraki APIs. Which line of code must be added to the box where the code is missing to complete the python request?
- A. Option A
- B. Option C
- C. Option D
- D. Option B
Answer: D
Explanation:
To remove a device from the network 'ENAUTO' using Meraki APIs, the engineer must send an HTTP DELETE request to the Meraki API endpoint for device removal. The correct line of code to be added should specify the DELETE method, the URL for the API endpoint, and include headers that typically contain authentication information. Option B is correct because it uses requests.request('DELETE', url, headers=headers) which specifies the DELETE method and includes both the URL and necessary headers. References: Automating Cisco Enterprise Solutions Official Cert Guide
NEW QUESTION # 60
When a Grafana dashboard is built to receive network events from Cisco DNA Center, which integration bundle is enabled to send notifications?
- A. DNA Center Rest API
- B. Network Events for REST API Endpoint
- C. Basic ITSM CMDB Synchronization
- D. Network Issue Monitor and Enrichment for ITSM
Answer: B
Explanation:
When integrating a Grafana dashboard with Cisco DNA Center to receive network events, the integration bundle that is enabled is:
* C: Network Events for REST API Endpoint. This integration allows Grafana to receive network event notifications from Cisco DNA Center. The REST API Endpoint serves as the interface through which Grafana can subscribe to and receive network events, which can then be visualized on the dashboard1.
References:
* Automating Cisco Enterprise Solutions Official Cert Guide
* Cisco DNA Center documentation on Grafana Labs2
* Cisco Community discussion on using DNA Center as a datasource in Grafana3
* Cisco developer blog on DNA Center NOC Dashboard
NEW QUESTION # 61
Which protocol should be run on the LAN side of two edge routers (that are terminating primary and backup WAN circuits) to provide quick failover in case of primary WAN circuit failure?
- A. STP
- B. VRRP
- C. RIP
- D. VTP
Answer: B
NEW QUESTION # 62
During a network outage, a network administrator used the Cisco SD-WAN vManage Troubleshooting Dashboard APIs to troubleshoot the cause of the issue. Which detail is captured during troubleshooting with these APIs?
- A. public cloud resources
- B. connections summary
- C. OMP connection health
- D. VPN health
Answer: B
Explanation:
Section: Cisco SD-WAN
Explanation/Reference: https://sdwan-docs.cisco.com/Product_Documentation/Command_Reference/ Command_Reference/vManage_REST_APIs/Troubleshooting_APIs/Dashboard
NEW QUESTION # 63
Refer to the exhibit.
Which two parameters are mandatory when the Cisco Meraki API is used to create a network? (Choose two.)
- A. tags
- B. disableMyMerakiCom
- C. organizationId
- D. type
- E. timezone
Answer: C,D
Explanation:
Without organizationID and timezone, you will not be able to create a network. Organizationid is necessary for the connection. Timezone is necessary for the network id.
NEW QUESTION # 64
Information about a rebooted device needs to be displayed with an ID of 260faff9-2d31-4312-cf96- 143b46db0211 using the Cisco SD-WAN vManage Administration APIs. The API documentation states that deviceId is a required request parameter. Fill in the blank to create the REST call.
Answer:
Explanation:
deviceId
NEW QUESTION # 65
Which two API calls are used to trigger a device configuration sync in Cisco DNA Center? (Choose two.)
- A. PUT /dna/intent/api/v1/network-device
- B. PUT /dna/intent/api/v1/network-device/{networkDeviceId}/sync
- C. PUT /dna/intent/api/v1/network-device/sync
- D. PUT /dna/intent/api/v1/network-device/sync-all
- E. POST /dna/intent/api/v1/network-device/{networkDeviceId}/sync
Answer: A,C
NEW QUESTION # 66 
Refer to the exhibit. A GET request is issued to the Cisco DNA Center REST API. Drag and drop the GET request URL subpaths from the left onto the objectives on the right. Not all options are used.
Answer:
Explanation:
Reference:
https://meraki.cisco.com/lib/pdf/meraki_whitepaper_captive_portal.pdf
NEW QUESTION # 67
The Cisco DNA Center Sites API must be used to add a device to a site, but only the site name is available.
Which API call must be used to retrieve the site identifier so that the device can be properly added to the network?
- A. /dna/intent/api/v1/site
- B. /dna/intent/api/site/siteId
- C. /dna/intent/api/v1/site/siteName
- D. /dna/intent/api/site
Answer: A
NEW QUESTION # 68
When API request are implement for Cisco DNA Centre, which two response are returned in the JSON response when HTTP GET call is made to obtain site health? (choose two)
- A. clientHealthWired
- B. overallBadDevices
- C. routerGoodCount
- D. totalApplicationCount
- E. clientHealthAverage
Answer: A,C
NEW QUESTION # 69
Webhook that are generated by Cisco DNA Center are REST calls with which properties?
- A. XML payload delivered via POST
- B. JSON payload delivered via POST
- C. XML payload delivered via PUT
- D. JSON payload delivered via PUT
Answer: D
NEW QUESTION # 70
Drag and drop the commands to the Ansible playbook that applies configuration to an interface on a Cisco IOS XE device. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 71
When API request are implement for Cisco DNA Centre, which two response are returned in the JSON response when HTTP GET call is made to obtain site health? (choose two)
- A. routerGoodCount
- B. clientHealthWired
- C. clientHealthAverage
- D. totalApplicationCount
- E. overallBadDevices
Answer: C,E
Explanation:
When making an HTTP GET call to obtain site health from Cisco DNA Centre, the JSON response includes various health indicators. The clientHealthAverage is a key metric that represents the average health of clients connected to the site, which can include both wired and wireless clients. This metric provides a general overview of the client health status within the site. On the other hand, overallBadDevices is another important metric that indicates the number of devices that are in a 'bad' state, which could be due to issues like high utilization, errors, or other factors affecting their performance. These two metrics are crucial for administrators to quickly assess the health of the site and identify areas that may require attention or troubleshooting.
References := Health Monitoring - Cisco Catalyst Center 2.3.7 - Cisco DevNet (Automating Cisco Enterprise Solutions Official Cert Guide)
NEW QUESTION # 72
Which curl command is used to update the SNMP community of network ID "1234567" to read-only?
- A. Option A
- B. Option C
- C. Option D
- D. Option B
Answer: D
Explanation:
Explanation
PUT is used to update the snmp network ID. The access has to be community and not users. Therefore, option B is correct.
NEW QUESTION # 73
A customer has several remote sites connected with the HQ via microwave links. An engineer has been asked to propose a backup WAN connectivity for these sites with these requirements:
Physical WAN connectivity is not available for most of these sites.
A low-cost and fast-to-implement backup solution must be deployed.
Bandwidth needs for the backup link are low.
Users can tolerate a WAN outage of up to 2 hours.
Which backup WAN link type does the engineer recommend?
- A. laser link
- B. 802.16 WiMAX
- C. LTE
- D. 802.15.1 Bluetooth
Answer: C
NEW QUESTION # 74 
Refer to the exhibit. Which device type is functioning in a degraded state?
- A. distribution switch
- B. access point
- C. access switch
- D. wireless LAN controller
Answer: C
NEW QUESTION # 75
Refer to the exhibit.
Which two parameters are mandatory when the Cisco Meraki API is used to create a network? (Choose two.)
- A. tags
- B. disableMyMerakiCom
- C. organizationId
- D. type
- E. timezone
Answer: C,D
Explanation:
Explanation
Without organizationID and timezone, you will not be able to create a network. Organizationid is necessary for the connection. Timezone is necessary for the network id.
NEW QUESTION # 76
The automation engineer must replace device configuration using RESTCONF. How is this configured using
the Python library Requests?
- A. patch()
- B. put()
- C. delete()
- D. post()
Answer: B
NEW QUESTION # 77
Refer to the exhibit.
An engineer creates a Python script using RESTCONF to display hostname information. The code must be completed so that it can be tested. Which string completes the highlighted areas in the exhibit?
- A. json
- B. yang.data+json
- C. yang +json
- D. yang-data+json
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/prog/configuration/166/b_166_programmability_cg/restconf_prog_int.html
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/prog/configuration/166/b_166_programmability_cg/restconf_prog_int.html
NEW QUESTION # 78
Information about a rebooted device needs to be displayed with an ID of 260faff9-2d31-4312-cf96-
143b46db0211 using the Cisco SD-WAN vManage Administration APIs. The API documentation states that deviceId is a required request parameter. Fill in the blank to create the REST call.
Answer:
Explanation:
GET
Explanation:
To retrieve information about a rebooted device using the Cisco SD-WAN vManage Administration APIs, you need to construct a REST call with the HTTP GET method. The base URL is https://vmanage-ip-address:8443/dataservice/device/reboots, where you replace vmanage-ip-address with the actual IP address of your vManage instance. The query parameter deviceId is appended to the URL with the value 260faff9-2d31-4312-cf96-143b46db0211, which is the unique identifier of the device. References := (Automating Cisco Enterprise Solutions Official Cert Guide)
NEW QUESTION # 79
What does Cisco DNA Center use to manage third-party devices?
- A. templates
- B. command runners
- C. device packages
- D. multivendor SDK
Answer: D
NEW QUESTION # 80
What is primary purpose of using the Cisco SD-WAN vManage Certificate Management API?
- A. to securely deploy vManage
- B. to install signed certificates
- C. to contact Enterprise Certificate Authority
- D. to report an issue to Cisco TAC
Answer: A
Explanation:
Section: Cisco SD-WAN
Explanation/Reference: https://sdwan-docs.cisco.com/Product_Documentation/vManage_Help/Release_17.1/Configuration/ Certificates
NEW QUESTION # 81
......
Cisco 300-435 exam is an important certification for network engineers, software developers, and automation specialists who want to stay ahead in their careers. Passing 300-435 exam will not only validate your skills but also help you gain recognition in the industry as an expert in automating and programming Cisco enterprise solutions.
Pass Cisco 300-435 Exam Info and Free Practice Test: https://examtests.passcollection.com/300-435-valid-vce-dumps.html
