HPE0-V14 Dumps are Available for Instant Access [2023]
Practice with these HPE0-V14 dumps Certification Sample Questions
How much HP HPE0-V14: Building HPE Hybrid IT Solutions exam cost
HP HPE0-V14: Building HPE Hybrid IT Solutions exam cost is $110, for more information please visit Official Website.
NEW QUESTION 57
Refer to the exhibit.
Drag the correct protocols from the left to the appropriate area on the topology on the right.
Answer:
Explanation:
NEW QUESTION 58
A customer is considering an upgrade of their networking infrastructure with HPE FlexFabric 5940 series switch.
Match the fan tray option with the airflow direction.
Answer:
Explanation:
NEW QUESTION 59
A system administrator is performing the BIOS/Platform configuration of a DL380 Gen10 servers You notice the amber health LED.
The health status of which solution components can be verified with embedded UEFI Diagnostics? {Select two.)
- A. Power Supplies
- B. Processor
- C. FC HBA
- D. iLONAND
- E. Primera node
Answer: B,D
NEW QUESTION 60
You plan to install an HPE ProLiant DL360 Gen10 in an environment with an ambient temperature of 45 C (113 F).
Which additional option is required?
- A. Gen10 Bezel Kit
- B. M.2 Solid State Enablement Kit
- C. High Performance Fan Kit
- D. 500W Flex Slot Platinum PS Kit
Answer: C
NEW QUESTION 61
Match each characteristic to the appropriate RAID level.
Answer:
Explanation:
NEW QUESTION 62
Which backup targets are available from an HPE StoreOnce backup system? (Choose two.)
- A. Catalyst
- B. NVMe
- C. S3
- D. VTL
- E. iSCSI
Answer: A,D
Explanation:
Reference:
https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c03824941
NEW QUESTION 63
When should you choose to populate a server with LRDlMMs?
- A. when memory capacity is the most important factor
- B. when price is the most important factor
- C. when error correction is the most important factor
- D. when memory speed is the most important factor
Answer: B
NEW QUESTION 64
A customer requires 12 Gb local storage for their VMware boot volumes, which require high-performance read cycles to enable the operating system to boot quickly.
Which drive type provides the most appropriate size and most cost-effective way to meet this requirement?
- A. Mixed-use SSD
- B. SATA nearline
- C. SAS midline
- D. Flash media drive
Answer: D
NEW QUESTION 65
You are troubleshooting a POST error on a HPE ProLiant rack-mount server. HPE support has directed you to test a minimum hardware configuration.
Which components should you remove? (Choose two.)
- A. all cooling fans
- B. all expansion boards
- C. redundant processors
- D. CMOS battery
- E. all external storage media
Answer: C,E
NEW QUESTION 66
A customer has implemented an HPE ProLiant server with internal storage and needs to monitor the array health status.
Which management application can the customer use to discover errors quickly and minimize the possible downtime?
- A. InfoSight
- B. Intelligent Management Center
- C. Smart Storage Administrator
- D. Insight Online
Answer: C
NEW QUESTION 67
A customer requires a management solution that will provide email notifications if hardware errors occur on their servers.
Which management solution provides this functionality?
- A. HPE SUM
- B. HPE SUT
- C. iLO Advanced Edition
- D. UEFI System Configuration
Answer: C
Explanation:
https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-a00026111en_us#N11E72
iLO AlertMail enables user to configure iLO to send alert conditions detected independently of the host operating system to one or more email addresses. iLO AlertMail messages include major host system events that appear in the IML. For example, if a fan failure occurs, an event is recorded in the IML and an email message with the details is sent to the configured email addresses.
NEW QUESTION 68
What is a primary benefit of DAS?
- A. It is connected directly to a server.
- B. It is presented as an iSCSI LUN to the attached server.
- C. It can be accessed by both server and non-server devices simultaneously.
- D. It takes advantage of Common Internet File System (CIFS).
Answer: C
NEW QUESTION 69
Match the HPE Tool with its use case. Select all that apply.
Answer:
Explanation:
NEW QUESTION 70
A customer environment is being managed and monitored with HPE OneView. A review of the OneView log shows that there have been several trap storm events.
Which series of events must take place for OneView to insert a Trap Storm event entry into the log of system events?
- A. Four or more ports on the same network switch have reported sequential SNMP trap messages
- B. SNMP traps from three or more identical hosts have been logged within the past 256 seconds.
- C. Three or more SNMP trap messages have been logged with increasingly critical variable string values.
- D. Four or more identical SNMP traps have been logged within the past 30 seconds.
Answer: C
NEW QUESTION 71
Match the stacking technology to the switch series.
Answer:
Explanation:
Reference:
https://community.arubanetworks.com/community-home/digestviewer/viewthread?MID=25306 https://en.wikipedia.org/wiki/Intelligent_Resilient_Framework
NEW QUESTION 72
A customer with limited IT administration resources needs a complete HPE server, storage, and networking solution. The solution must be able to be deployed in an hour or less through a simple, wizard-based setup. They want to manage the HPE solution through a simple, integrated plug-in to vCenter, since their IT staff members are already familiar with vCenter.
Which HPE solution best meets the customer requirements?
- A. HPE Proliant for Microsoft Azure Stack
- B. HPE OneView for VMware vCenter
- C. HPE Nimble Storage dHCI
- D. HPE ConvergedSystem 750
Answer: B
NEW QUESTION 73
Read the question, and then refer to the exhibit.
<Switch-A>display interface Ten-GigabitEthernet 1/0/1 Ten-GigabitEthernet1/0/1 Current state: Administratively DOWN Line protocol state: DOWN IP packet frame type: Ethernet II, hardware address: d894-03fb-793d Description: Ten-GigabitEthernet1/0/1 Interface Bandwidth: 10000000 kbps Loopback is not set Media type is stack wire, port hardware type is STACK_SFP_PLUS Unknown-speed mode, unknown-duplex mode Link speed type is autonegotiation, link duplex type is autonegotiation Flow-control is not enabled Maximum frame length: 10000 Allow jumbo frames to pass Broadcast max-ratio: 100% Multicast max-ratio: 100% Unicast max-ratio: 100% PVID: 1 MDI type: Automdix Port link-type: Trunk VLAN Passing: 10, 20 VLAN permitted: 10, 20 Trunk port encapsulation: IEEE 802.1q Port priority: 0 Last link flapping: 0 hours 0 minutes 18 seconds Last clearing of counters: Never Peak input rate: 78 bytes/sec, at 2011-03-31 04:55:57 Peak output rate: 15 bytes/sec, at 2011-03-30 23:00:57 Last 300 second input: 0 packets/sec 67 bytes/sec - % Last 300 second output: 0 packets/sec 14 bytes/sec - % Input (total): 62670 packets, 8565340 bytes 0 unicasts, 0 broadcasts, 62670 multicasts, 0 pauses Input (normal): 62670 packets, - bytes 0 unicasts, 0 broadcasts, 62670 multicasts, 0 pauses Input: 0 input errors, 0 runts, 0 giants, 0 throttles 0 CRC, 0 frame, - overruns, 0 aborts - ignored, - parity errors Output (total): 3707 packets, 1294835 bytes 0 unicasts, 0 broadcasts, 3707 multicasts, 0 pauses Output (normal): 3707 packets, - bytes 0 unicasts, 0 broadcasts, 3707 multicasts, 0 pauses Output: 0 output errors, - underruns, - buffer failures 0 aborts, 0 deferred, 0 collisions, 0 late collisions 0 lost carrier, - no carrier
A customer added a new switch to their network. They connected it using interface Ten-GigabitEthernet 1/0/1. They are using VLAN 10 and 20 for the devices in their network.
The new switch was fully operational. Then, the customer experienced a power failure later that day and could not reach any device on the new switch after the power returned.
From the output in the exhibit, would could be the issue?
- A. The interface is administratively down.
- B. The interface is configured for a PVID of VLAN 1.
- C. The interface link-speed and duplex are unknown.
- D. The interface loopback is not set.
Answer: A
Explanation:
"<Switch-A>display interface Ten-GigabitEthernet 1/0/1 Ten-GigabitEthernet1/0/1 Current state: Administratively DOWN Line protocol state: DOWN IP"
NEW QUESTION 74
A customer needs a storage solution to host a new virtualization platform that will host a database application. The customer is considering an HPE Nimble array.
What features would lead you to propose an HPE Nimble array over an HPE 3PAR array (Select two.)
- A. hyperconverged solution
- B. cloud Native
- C. lower operating costs
- D. future proof design
- E. inline deduplication and compression
Answer: C,E
NEW QUESTION 75
A customer needs a new environment to support an ERP system. The sizing information you received shows the following requirements:
* 3 servers with dual AMD processors, 256GB RAM, and 10Gb network connectivity
* 10TB of high performance shared storage
* Cloud-based performance monitoring and analytics
The customer prefers rack mounted equipment.
Identify the components that will meet the customer requirements, then drag the correct components on the left to their appropriate location in the environment on the right.
Answer:
Explanation:
Explanation
NEW QUESTION 76
......
Get Instant Access REAL HPE0-V14 DUMP Pass Your Exam Easily: https://examtests.passcollection.com/HPE0-V14-valid-vce-dumps.html
