[Oct 04, 2022] Fast Exam Updates H35-480_V3.0 dumps with PDF Test Engine Practice
Exam Valid Dumps with Instant Download Free Updates
NEW QUESTION 30
What is the required distance between a CPE and a gNodeB in a 5G network test?
- A. Less than 10m
- B. Greater than 5m
- C. Less than 5m
- D. Greater than 10m
Answer: B
NEW QUESTION 31
On an NSA network, the eNodeB immediately triggers the SgNB addition procedure after a UE attaches to the LTE network. If the SgNB addition fails, the eNodeB attempts to add the SgNB again until it is successful.
- A. True
- B. False
Answer: A
NEW QUESTION 32
E2E network device update is required for the evolution from 5G NSA networking to SA networking.
- A. True
- B. False
Answer: B
NEW QUESTION 33
Which of the following RF modules support 64T64R?
- A. AAU5313
- B. AAU5613
- C. AAU5619
- D. RRU5901
Answer: B,C
NEW QUESTION 34
The RSRP value of the test terminal can be viewed on the GENEX Probe. Which of the following test results indicate good signal quality?
- A. 0 to 60dBm
- B. -60dBm to -90dBm
- C. -30 to -60dBm
- D. 30 to 60dBm
Answer: C
NEW QUESTION 35
SSB GSCN is the center frequency number of an NR cell.
- A. True
- B. False
Answer: B
NEW QUESTION 36
The BBU5900 uses a modular design. Which of the following subsystems constitute the BBU?
- A. Transmission subsystem
- B. RF subsystem
- C. Baseband subsystem
- D. Main control subsystem
Answer: A,C,D
NEW QUESTION 37
A larger CQI value indicates a better channel quality.
- A. True
- B. False
Answer: A
NEW QUESTION 38
If the length of the CPRI optical fiber between a BBU and an RRU exceeds 150 m, you are advised to use a multimode fiber.
- A. True
- B. False
Answer: A
NEW QUESTION 39
In what scenarios is GENEX Assistant typically applied?
- A. Routine network optimization
- B. Wireless network adjustment
- C. Single site verification
- D. Batch processing of gNodeB alarms
Answer: D
NEW QUESTION 40
5G wireless network cloudification can significantly improve the user rate.
- A. True
- B. False
Answer: A
NEW QUESTION 41
Which of the following files must be prepared when remotely commissioning a gNodeB using the MAE Deployment?
- A. Site deployment list
- B. Base station software package of the target version
- C. Base station license
- D. Data configuration file of the base station
Answer: A,B
NEW QUESTION 42
According to 5G eMBB service requirements, which of the following is the minimum rate required for network edge coverage?
- A. 10Gbps
- B. 1Gbps
- C. 1Mbps
- D. 100Mbps
Answer: D
NEW QUESTION 43
Which of the following channels (signals) can be used for cell measurement in NR?
- A. PT-RS
- B. SSB
- C. DM-RS
- D. CSI-RS
Answer: B,D
Explanation:
Explanation
https://www.sciencedirect.com/topics/computer-science/channel-quality
NEW QUESTION 44
The mmWave range is new for NR. It supports the largest bandwidth in a cell but has poor coverage capabilities.It requires high performance from RF components and generally applies only to line of sight (LOS) coverage.
- A. True
- B. False
Answer: B
NEW QUESTION 45
Which of the following statements about the functions of an AAU are correct?
- A. Up/down conversion of spectrum
- B. Analog-to-digital/digital-to-analog conversion
- C. Signal filtering
- D. Baseband data processing
- E. Power amplification
Answer: B,D
NEW QUESTION 46
Which type of information about NR cells is carried in the neighboring NR cell MRs reported by UEs?
- A. MACCE
- B. PCI
- C. TA
- D. RSRP
Answer: B,D
NEW QUESTION 47
Which of the following signals is measured by a 5G UE to report channel quality information such as the CQI, RI, and PMI to a gNodeB?
- A. SSB SINR
- B. SSB RSRP
- C. CSI-RS RSRP
- D. CSI-RS SINR
Answer: C,D
NEW QUESTION 48
During 5G single site verification, you only need to test the user access and rate. Other test items are analyzed in drive tests.
- A. True
- B. False
Answer: B
NEW QUESTION 49
What are the typical sizes of ping packets and intervals in single site verification?
- A. 1500bytes, 2s
- B. 1500 bytes,1s
- C. 32 bytes,1s
- D. 32 bytes, 2s
Answer: B
NEW QUESTION 50
In SA networking, the mobile country code (MCC) and mobile network code (MNC) information added on the gNodeB must be consistent with the PLMN information on the core network.
- A. True
- B. False
Answer: A
NEW QUESTION 51
Which of the following methods can be used by a gNodeB to obtain downlink channel characteristics?
- A. Downlink DMRS signal
- B. UE-reported uplink PMI
- C. DMRS of the uplink PUSCH of the UE
- D. Uplink SRS signal
Answer: C
NEW QUESTION 52
Which of the following NR channels or signals supports static and dynamic power control?
- A. PUSCH
- B. PDCCH
- C. SS
- D. PBCH
Answer: B
NEW QUESTION 53
After the cell search is complete, a 5G UE automatically selects a PLMN based on the priority sequence.Which PLMN will the UE preferentially select for registration?
- A. HPLMN
- B. U-PLMN
- C. EHPLMN
- D. RPLMN
Answer: B
NEW QUESTION 54
......
Download H35-480_V3.0 Exam Dumps PDF Q&A: https://examtests.passcollection.com/H35-480_V3.0-valid-vce-dumps.html
