Jun-2024 New Version DES-6322 Certificate & Helpful Exam Dumps is Online
DES-6322 Free Certification Exam Material with 106 Q&As
EMC DES-6322 (Specialist - Implementation Engineer, VxRail) Certification Exam is designed for professionals who want to validate their skills in implementing and deploying VxRail solutions. VxRail is a hyper-converged infrastructure (HCI) solution that enables organizations to simplify their IT infrastructure, reduce costs, and improve operational efficiency. Specialist - Implementation Engineer, VxRail Exam certification exam is intended for individuals who have experience with VxRail and want to demonstrate their proficiency in implementing and integrating VxRail solutions.
NEW QUESTION # 25
Match each VxRail, data protection solution with its functionality.
Answer:
Explanation:
NEW QUESTION # 26
For which typical activity would the Full data migration setting be used when placing a VxRail host into maintenance mode?
- A. Temporary maintenance
- B. Shutting down an entire cluster
- C. Rebooting a single ESXi host
- D. Permanently removing host from cluster
Answer: D
Explanation:
NEW QUESTION # 27
For which VxRail models must the iDRAC NIC Selection be set to Dedicated?
- A. D, E, P, S, and V Series
- B. D, E, and G Series
- C. E, P, S, and V Series only
- D. D, G, P, S, and V Series
Answer: B
NEW QUESTION # 28
What is a characteristic of the VxRail S Series node?
- A. Large form factor drives
- B. Form factor of 2U4N
- C. Dense Flash disks
- D. Form factor of 1U1N
Answer: C
Explanation:
NEW QUESTION # 29
What is the minimum number of VxRail nodes required for a vSAN storage policy with RAID-5 (Erasure Coding)?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 30
A VxRail Manager VM must be configured as follows:
* IP address: 192 168.10.16
* Net mask: 255.255.255.0
* Gateway: 192 168 10 254
Which command must be used?
- A. vxrail-prrmary -config --ip 192 168 10 16 -netmask 255 255 255 0 -gateway 192 168 10 254
- B. vxrail-network -config --vxrail-address 192.166 10 16 --vxrail-netmask 255 255.255 0 --vxrail-gateway
192.168.10.254 - C. vxrail-primary -config --vxrail-address 192.168.10 16 --vxrail-netmask 255 255 255 0 -vxrail-gateway
192.168,10 254 - D. vxrail-network-config --ip 192 168 10.16-netmask 255.255.255.0-gateway 192 168 10.254
Answer: C
NEW QUESTION # 31
Match each IDRAC Maintenance page tab to its description.
Answer:
Explanation:
NEW QUESTION # 32
Which vSAN feature requires an All-Flash cluster?
- A. Storage Policy Based Management
- B. Data-at-Rest Encryption
- C. Data-in-Transit Encryption
- D. Erasure Coding
Answer: B
NEW QUESTION # 33
Which service determines the primary node after powering on the VxRail nodes during the deployment of a VxRail cluster?
- A. Marvin
- B. Loudmouth
- C. Mystic
- D. Election
Answer: D
Explanation:
NEW QUESTION # 34
A VxRail Cluster has just been deployed. Use the VxRail simulator to determine the Service Tag, Model, and ESXJ IP Address of the first node - vcluster730.esx01.edu.local.
Note: It is necessary to dose (x) the simulator window before you can select a response to this question.
- A. Option D
- B. Option C
- C. Option B
- D. Option A
Answer: A
NEW QUESTION # 35
Use the VxRail simulator to explore the system. What is the presented configuration?
Note: It fs necessary to close (x) the simulator window before you can select a response to this question.
- A. Internal vCenter and Internal DNS
- B. Internal vCenter and external DNS
- C. External vCenter and internal DNS
- D. External vCenter and external DNS
Answer: B
NEW QUESTION # 36
Match each VxRail API request with the information to be retrieved.
Answer:
Explanation:
NEW QUESTION # 37
How should an administrator manually validate the DNS readiness of a customer network?
- A. Run a traceroute to the DNS server
- B. Ping the default gateway of the management VLAN
- C. Run nslookup on server FQDN and IP
- D. Generate a Network PEQ
Answer: A
NEW QUESTION # 38
A VxRail implementation engineer is validating the network environment with NVT. The proposed switch configuration is shown in the exhibit. The ToR Switch information file is available.
Use the VxRail simulator to set up NVT for switch validation. Import the switch Information and tag the ports based on the exhibit.
Answer:
Explanation:
Send your suggestions for this question.
NEW QUESTION # 39
What is the correct sequence of steps to perform a RASR Factory Reset using an SD card?
Answer:
Explanation:
NEW QUESTION # 40
Match each component of the VxRail HCI System Software to its description.
Answer:
Explanation:
NEW QUESTION # 41
An implementation engineer is expanding an existing VxRail E Series cluster with an additional node The version of the node is not at the current cluster level and is not compatible What action must be performed before adding the node?
- A. Compute node expansion
- B. RASR Factory Image Upgrade
- C. RASR Factory Reset
- D. Order node with correct image
Answer: D
NEW QUESTION # 42
In a VxRail Stretched Cluster deployment of 8 nodes on between sites?
- A. Primary to Witness site RTT: < 250 ms Secondary to Witness site RTT; < 250 ms Primary to Secondary site RTT: < 5 ms
- B. Primary to Witness site RTT: < 150 ms Secondary to Witness site RTT: < 150 ms Primary to Secondary site RTT: < 10 ms
- C. Primary to Witness site RTT: < 200 ms Secondary to Witness site RTT: < 200 ms Primary to Secondary site RTT: <: 5 ms
- D. Primary to Witness site RTT: < 200 ms Secondary to Witness site RTT < 200 ms Primary to Secondary site RTT: < 10 ms
Answer: B
NEW QUESTION # 43
An implementation engineer is configuring the network firewall to support a VxRail installation. Where can they find the necessary firewall rules?
- A. Network Validation Tool
- B. Rack worksheet of the Network PEQ
- C. As-Built Configuration Report
- D. VxRail Configuration Portal
Answer: B
Explanation:
NEW QUESTION # 44
A VxRail Manager VM must be configured as follows:
* IP address: 192 168.10.16
* Net mask: 255.255.255.0
* Gateway: 192 168 10 254
Which command must be used?
- A. vxrail-prrmary -config --ip 192 168 10 16 -netmask 255 255 255 0 -gateway 192 168 10 254
- B. vxrail-primary -config --vxrail-address 192.168.10 16 --vxrail-netmask 255 255 255 0 -vxrail-gateway 192.168,10 254
- C. vxrail-network-config --ip 192 168 10.16-netmask 255.255.255.0-gateway 192 168 10.254
- D. vxrail-network -config --vxrail-address 192.166 10 16 --vxrail-netmask 255 255.255 0 --vxrail-gateway 192.168.10.254
Answer: B
NEW QUESTION # 45
Match each IDRAC Maintenance page tab to its description.
Answer:
Explanation:
NEW QUESTION # 46
......
Get The Important Preparation Guide With DES-6322 Dumps: https://examtests.passcollection.com/DES-6322-valid-vce-dumps.html
