Our pass rate reaches to 85%

As the data shown our pass rate reaches to 85% last month. Besides, more than 100000+ candidates register our website now. According to our customer's feedback, our Designing Cisco Wireless Networks test questions have 80% similarity to the real questions of real Designing Cisco Wireless Networks. You will pass Cisco 300-110 Designing Cisco Wireless Networks easily if you prepare the Designing Cisco Wireless Networks exam pdf carefully.

For most people who want to pass Cisco 300-110 Designing Cisco Wireless Networks real exam at first attempt, choosing right certification training is very important. It will change your career even your future. As a leading exam dumps provider, our website provides you with accurate and complete 300-110 test questions and test answers for your Designing Cisco Wireless Networks, which guarantee the high pass rate. The key of our success is to constantly provide the best quality Designing Cisco Wireless Networks exam pdf products with the best customer service.

Our Designing Cisco Wireless Networks exam prep is prepared by the expert professionals in the IT industry who are specialized in the study of preparation of Designing Cisco Wireless Networks pass guide. They do thorough research and analyze the current trends and requirement of Designing Cisco Wireless Networks real exam to provide relevant and regularly updated Designing Cisco Wireless Networks exam prep for you. Our Designing Cisco Wireless Networks exam pdf will help in preparing for the Designing Cisco Wireless Networks test questions and let you answer the questions in the most accurate manner in your 300-110 Designing Cisco Wireless Networks.We design our products to facilitate our customers in an efficient and effective manner, we keep our customers informed about all the current and up coming products of 300-110 Designing Cisco Wireless Networks, that's why we have many returned customers to buy our dumps.

Instant Download 300-110 Exam Braindumps: Upon successful payment, Our systems will automatically send the product you have purchased to your mailbox by email. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)

Our service

Full refund: we ensure you pass exam at your first attempt, but if you lose exam with our valid Designing Cisco Wireless Networks exam collection questions we will full refund you.

Updating: you will be allowed to free update Designing Cisco Wireless Networks exam pdf one-year after you buy. And we will send you the latest version to your email once the 300-110 Designing Cisco Wireless Networks practice exam update.

Invoice: When you need the invoice, please email us the name of your company. We will make custom invoice according to your demand.

Payment: Our payment is by Credit Card because it's safe and fast. But it can be bound with the credit card, so the credit card is also available.

Customer Assisting: There are 24/7 customer assisting support you in case you may encounter some problems in downloading or purchasing. Please fell free to contact us.

Cisco 300-110 Exam Syllabus Topics:

Cisco Designing Cisco Wireless Networks Sample Questions:

Question 1

A network design supports data and voice in 2.4 GHz and 5.0 GHz. The design must support asset tracking without affecting the existing design. Which action must be taken?

A. Increase the transmission power of the existing APs.
B. Add more monitor mode APs to the perimeter of the area.
C. Add more local mode APs to the perimeter of the area.
D. Use more APs grouped closer together.

Question 2

A university is deploying a wireless lecture-capture application that streams video to many clients simultaneously. Which controller design should the engineer specify to make efficient use of the wired network?

A. multicast disabled with unicast video distribution
B. broadcast forwarding enabled on all dynamic interfaces
C. multicast-unicast mode
D. multicast-multicast mode with an AP multicast group address and PIM enabled on the wired network

Question 3

A customer has two Cisco Catalyst 9800 Series WLCs named WLC-A and WLC-B in an N+1 configuration with the same WLANs but different Layer 3 interfaces for each WLC, and APs in local mode. WLC-A manages Building A APs and WLC-B manages Building B APs. The customer wants users to remain connected and retain their session state including the IP address when moving between buildings. How must this requirement be incorporated into the design?

A. Implement AP groups for each building by using the same name on WLC-A and WLC-B.
B. Connect WLC-A and WLC-B by using the redundancy port to sync client sessions.
C. Create a mobility tunnel between WLC-A and WLC-B with the same group name.
D. Configure WLC-A and WLC-B in a high-availability cluster and set a mobility MAC address.

Question 4

An engineer is using Ekahau Site Survey to create a WLAN plan for a warehouse. The plan is to use patch antennas. Which setting is adjusted when simulated APs are placed on the map?

A. Wi-Fi technology
B. AP transmission power
C. antenna downtilt
D. AP channel

Question 5

A retail customer opened two new branch locations, and the main store HQ handles data center operations. Each branch location has three Cisco Catalyst 9130 APs. The data center has a Catalyst 9800 WLC with 18 Catalyst 9130 APs. Growing business and poor WAN uplinks cause impacted branch AP and wireless client connectivity back to HQ, and each branch location is now planned to have its own EWC controller based on C9130 AP to keep traffic local. This new design must accommodate: guests and employees sharing the same WLAN with different VLANs, guest uplink and downlink traffic restricted to 2 Mbps, and each branch acting as secondary or tertiary backup to another branch with the data center WLC always being the primary. Which design approach should the consulting engineer take?

A. One C9130 branch AP must be converted to EWC mode, and the preferred controller is set to that AP with HQ WLC set as N+1 backup. The branch guest WLAN will use local web auth on guest VLAN.
B. Two C9130 branch APs must be converted to EWC mode, one for the active controller and the other for standby, with the standby EWC set as N+1 backup. HQ AAA must be added to EWC, and WLAN with dot1x + AAA override must be configured.
C. Two C9130 branch APs must be converted to EWC mode, one for the active controller and the other for standby, with HQ WLC set as a primary N+1 backup, and other branches' EWC must be added as mobility peers. The branch WLAN will use the guest anchor to HQ WLC for guest VLAN access.
D. One C9130 branch AP must be converted to EWC mode, and the preferred controller is set to that AP with HQ WLC set as a primary N+1 backup and other branches' EWC AP as secondary and tertiary. HQ AAA must be added to EWC, and WLAN with MAB + AAA override must be configured.

Solutions: