Based on Official Syllabus Topics of Actual Huawei H20-923_V1.0 Exam
Free H20-923_V1.0 Dumps are Available for Instant Access
Huawei H20-923_V1.0 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
| Topic 12 |
|
| Topic 13 |
|
| Topic 14 |
|
| Topic 15 |
|
NEW QUESTION # 37
For hourly statistics reports, data of up to how many days can be queried? For monthly statistics reports, data of up to how many years can be queried?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
In Huawei NetEco statistical reporting, the query range is constrained by the report data retention policy and how summary data is stored. Forhourly statistics, the platform keeps a limited window of high-granularity data to balance storage consumption and performance. The hourly report retention is120 hours, which equals5 days. That is why hourly statistics queries are limited to5 days-beyond that window, hourly granularity is no longer retained in the report database for direct querying. For longer time horizons, NetEco relies on lower- granularity summaries (daily/weekly/monthly/yearly). Formonthly statistics, the platform supports long-term trend analysis and KPI tracking, and the maximum historical horizon aligns with the long-term statistics retention boundary used by NetEco reporting, which isup to 5 years. This design ensures fast query response, manageable database growth, and clear separation between short-term operational detail (hourly) and long- term management analysis (monthly/yearly).
NEW QUESTION # 38
In IT scenarios, which of the following are the power supply and distribution components of the FusionDC1000A?
- A. SmartLi
- B. AC/DC power system
- C. Integrated UPS
- D. Power PDB
Answer: A,C,D
Explanation:
In the FusionDC1000A IT scenario, the power chain is built around an AC input, conditioned backup power, energy storage, and final distribution to the IT racks.Integrated UPSis the core power-conditioning component, providing voltage and frequency stabilization and uninterrupted supply during mains disturbances. The UPS works together withSmartLi, Huawei's lithium battery system, which serves as the energy storage unit to sustain the load during outages and to support controlled shutdown or generator switchover. After UPS output, power is delivered to the IT loads through thePower PDB, which performs downstream distribution, branch protection, and organized cable termination toward rack PDUs or IT equipment feeders. By contrast, anAC/DC power systemis typically associated with DC bus supply used in telecom-oriented or dedicated DC load scenarios, not the standard IT scenario architecture of FusionDC1000A that is centered on UPS plus battery plus AC distribution. Therefore, the correct components for IT scenarios are SmartLi, Power PDB, and Integrated UPS.
NEW QUESTION # 39
Which strategy most directly improves data center energy performance without compromising reliability when properly engineered and monitored?
- A. Oversize all cooling and power equipment permanently to avoid future upgrades
- B. Disable alarms to reduce nuisance notifications and operator workload
- C. Operate all redundant systems at full load simultaneously to maximize utilization
- D. Use higher allowable supply air temperature with containment and adaptive control to reduce compressor and fan energy
Answer: D
Explanation:
Huawei green data center concepts focus on reducing energy consumption through engineering controls rather than sacrificing resilience. Raising the allowable supply air temperature is a proven efficiency lever because it reduces compressor workload, expands economization opportunities where applicable, and can reduce fan energy when airflow is optimized. However, it must be implemented with airflow management-especially hot/cold aisle containment-to ensure server inlet temperatures remain within safe limits. Adaptive control is critical: monitoring rack inlet temperatures, cooling unit performance, and environmental conditions allows the system to dynamically adjust cooling output, fan speed, and setpoints to match real IT load. This avoids the common inefficiency of "overcooling for safety." When combined with standardized O&M procedures, alarm thresholds, and continuous trend analysis, the strategy improves overall energy performance while preserving reliability and service continuity. In contrast, permanent oversizing or forcing all redundant systems to run fully loaded wastes energy and can reduce operating efficiency. Properly engineered, monitored optimization delivers efficiency gains with controlled operational risk.
NEW QUESTION # 40
Which of the following are the user roles of Power Partner?
- A. Service manager of a rep office
- B. Project manager
- C. DOC
- D. Startup engineer
- E. Service engineer
- F. Inventory operations manager
Answer: A,B,C,D,E,F
Explanation:
Power Partner is Huawei Digital Power's partner service platform used to support delivery, commissioning, maintenance, and service operations across the full lifecycle of a project. To match real project workflows, the platform defines multiple user roles that align with different responsibilities and permission scopes. AStartup engineerfocuses on commissioning activities such as obtaining startup authorization, performing initial configuration, and completing functional verification. AService engineerhandles routine maintenance, inspections, troubleshooting, part replacement guidance, and closure of service cases. AProject managercoordinates delivery milestones, resource planning, and overall service execution to ensure acceptance criteria are met. AnInventory operations managermanages materials/parts flow, tracking, and availability to support timely repair and maintenance. TheDOC (Delivery/Dispatch Operations Center)role supports centralized operations such as work order dispatching, progress supervision, and process compliance.
Aservice manager of a representative officetypically oversees regional service quality, governance, and authorization control, ensuring the right people have the right access and that services are delivered according to Huawei process requirements.
NEW QUESTION # 41
Operators can view parameters and set parameters on the "User Settings" and "Comm Settings" menus.
- A. True
- B. False
Answer: A
Explanation:
On Huawei data center cooling/monitoring controllers, menu permissions are typically organized so that routine O&M staff (operator role) can perform day-to-day adjustments that are required for normal running and integration, without accessing factory-only commissioning items. TheUser Settingsmenu is designed for operational configuration such as target temperature/humidity setpoints, control preferences, and other user- level parameters that need to be tuned to match the data hall environment and load changes. TheComm Settingsmenu is intended for communication configuration used in site integration, such as setting communication addresses, baud rates, protocol-related parameters, or enabling interfaces needed for upper- layer systems (for example, monitoring platforms). These settings are considered part of normal operation management and must be accessible so operators can maintain monitoring connectivity, replace controllers, or restore communication after changes. Higher-risk parameters (for example, factory calibration, protected control logic, or deep commissioning values) are normally restricted to higher privilege roles, but viewing and setting parameters withinUser SettingsandComm Settingsis an operator-allowed function.
NEW QUESTION # 42
Which of the following are the functions of the SmartLi 3.0 battery control unit (BCU)?
- A. Fault diagnosis and protection
- B. Internal short circuit prediction
- C. Charge and discharge management
- D. Group capacity test
- E. Intelligent voltage sharing and active current balancing control
- F. Management on the BMU of each battery module
Answer: A,B,C,D,E,F
Explanation:
In Huawei SmartLi 3.0, the BCU acts as the cabinet-level "brain" of the lithium battery system, coordinating measurement, control, protection, and communication. Itmanages and supervises BMUsinside the cabinet by collecting key operating data such as voltage, temperature, SOC, and SOH, and by aggregating module information for higher-level management. The BCU supportscharge/discharge managementby monitoring string current and controlling operating behaviors to keep the battery within safe electrical and thermal limits.
To ensure consistent performance across parallel strings and cabinets, it implementsintelligent voltage sharing and active current balancing, which helps equalize currents, improve utilization, and reduce uneven aging. For safety and reliability, the BCU providesfault diagnosis and protection, including handling events such as overvoltage, undervoltage, overcurrent, and overtemperature, and it can isolate abnormal loops when required. SmartLi 3.0 also incorporatesinternal short-circuit risk predictionas part of its safety strategy. Finally, group capacity testingis supported as a maintenance function to verify usable capacity and system health.
NEW QUESTION # 43
The frequency of power supply equipment can be 50 Hz, 60 Hz, or 70 Hz.
- A. False
- B. True
Answer: A
Explanation:
In data center power systems, the utility grid frequency standard iseither 50 Hz or 60 Hz, depending on the country/region. Data center facility equipment-such as UPS systems, power distribution units, switchgear, and monitoring components-is designed to operate reliably under these standardized grid frequencies, with acceptable tolerance ranges around the nominal value. While some power conversion equipment can adapt between50/60 Hz(for example, via frequency tracking or double-conversion),70 Hz is not a standard utility frequencyused for data center facility power supply, and it is not treated as a normal operating frequency in typical design, acceptance testing, or O&M procedures. From an operations perspective, maintaining correct frequency is critical because abnormal frequency can trigger UPS transfer logic, increase losses, create synchronization issues with bypass sources, and negatively affect downstream IT loads. Therefore, stating that power supply equipment frequency "can be 50 Hz, 60 Hz, or 70 Hz" is incorrect for standard data center infrastructure practice.
NEW QUESTION # 44
Which of the following is not a scenario-based solution for Huawei data center products?
- A. FusionModule500
- B. FusionModule2000
- C. FusionDC800
- D. FusionDC1000
Answer: C
Explanation:
Huawei's scenario-based data center facility portfolio is organized around clearly defined solution families that map to typical deployment scenarios and site sizes. FusionModule500 and FusionModule2000 are smart modular data center solutions designed for standardized, fast deployment in equipment rooms and enterprise edge/branch scenarios.They integrate key subsystems such as power supply and distribution, cooling, monitoring, and optional fire protection into a modular architecture that reduces footprint and accelerates on- site delivery. Likewise, FusionDC1000 is Huawei's prefabricated modular data center series, delivered as complete, factory-integrated modules that combine civil engineering elements with electromechanical infrastructure for rapid construction, predictable quality, and scalable expansion across different capacity tiers. In contrast, FusionDC800 is not used as a defined scenario-based solution name within Huawei's mainstream data center facility solution lineup (where "FusionDC" offerings are represented by the FusionDC1000 series and "FusionModule" offerings by numbered FusionModule solutions). Therefore, FusionDC800 is the option that does not match Huawei's scenario-based solution naming.
NEW QUESTION # 45
After the battery module is installed, the torque and insulation should be checked according to the specified requirements.
- A. True
- B. False
Answer: A
Explanation:
This statement is true because post-installation verification is a mandatory acceptance step for battery systems in data centers. After a battery module is installed,torque verificationensures that all power terminals, interconnect bars, and grounding points meet the specified tightening requirements. If torque is too low, contact resistance increases, which can cause abnormal heating, voltage drop, nuisance alarms, and even connector damage during high current charge/discharge. If torque is too high, threads, lugs, or busbars can be damaged, creating hidden reliability risks.Insulation testingconfirms that the battery circuit has no unintended leakage paths to chassis or ground and that cable routing, connector seating, and protective covers are correct.
This is especially important for lithium battery cabinets where high DC voltage and large fault current capability demand strict electrical isolation. Performing torque and insulation checks after installation reduces early-life faults, improves safety, and ensures the cabinet can pass commissioning tests and enter stable service under UPS charge/discharge control.
NEW QUESTION # 46
Which of the following statements is false about how to start an electric heater?
- A. If "Dehumidification & Low temperature heating" is selected, the electric heater determines whether to start based on the temperature requirements when the dehumidification or heating conditions are met.
- B. When "Low temperature heating" is selected, the electric heater determines whether to start only based on the temperature requirements no matter whether the dehumidification function is enabled.
- C. When "Dehumidification heating", "Low temperature heating", or "Dehumidification & Low temperature heating" is selected, if the temperature in the equipment room is low, the air conditioner automatically starts the heating function to meet the temperature control requirements of the equipment room.
- D. When "Dehumidification heating" is selected, the electric heater determines whether to start based on the current temperature only when the dehumidification function is enabled.
Answer: C
Explanation:
Huawei precision cooling logic separates heater enablement into distinct control strategies to avoid unnecessary heating and to keep humidity control stable. InLow temperature heating, the heater is governed purely by the room temperature control demand: if temperature is below the heating threshold (or below setpoint with heating conditions met), the heater can start regardless of whether dehumidification is enabled, which matches statement D. InDehumidification heating, the heater is not a general low-temperature heater; it is an auxiliary function used to prevent overcooling during dehumidification and to maintain temperature while the unit dehumidifies. Therefore, the heater in this mode is permitted to start only when thedehumidification function is activeand temperature conditions require compensation, which matches statement B. Statement C is false because it incorrectly claims thatanyof the three selections will start heating automatically whenever room temperature is low; that is not true for "Dehumidification heating" unless dehumidification is actually enabled and running.
NEW QUESTION # 47
Which of the following are the user roles of Power Partner?
- A. Service manager of a rep office
- B. Project manager
- C. DOC
- D. Startup engineer
- E. Service engineer
- F. Inventory operations manager
Answer: A,B,C,D,E,F
NEW QUESTION # 48
Which of the following is the procedure for replacing a damaged UPS power module onsite?
- A. ##
- B. ##
- C. ##
- D. ##
Answer: D
Explanation:
For onsite replacement of a UPS power module, Huawei's maintenance logic follows a safe "isolate # remove
# insert # re-enable" sequence controlled by the moduleready switch. During removal, the ready switch must be rotated to theOFFstate first so the module is logically isolated from operation and will not participate in power conversion. After isolation, the four fixing screws are removed and a short waiting period is required to allow internal energy in capacitors to discharge before the module is pulled out. This matches statement#.
During installation, the ready switch must remainOFFbefore insertion to prevent unintended startup or arcing during connector engagement. The module is placed in position, inserted slowly and evenly until fully seated, then secured with the four screws. Only after mechanical fastening and full seating is confirmed should the ready switch be rotated to theONstate to allow the system to recognize and bring the module online. This matches statement#.
NEW QUESTION # 49
The NetEco can be deployed on any virtualization platform.
- A. False
- B. True
Answer: A
Explanation:
NetEco is an enterprise management application with specific runtime dependencies, including supported operating system versions, database/middleware compatibility, CPU/memory/storage requirements, and network/security prerequisites. Because of these dependencies, Huawei does not treat NetEco as "hypervisor- agnostic for any virtualization platform." In practice, NetEco deployment in virtualized environments is supported only when the virtualization stack meets Huawei's compatibility requirements, such as validated hypervisors/virtualization solutions, proper virtual hardware settings, and resource reservation rules to ensure stable performance (especially for alarm processing, historical data storage, and northbound integration tasks).
If deployed on an unverified virtualization platform, issues may occur such as clock drift, I/O latency, database performance bottlenecks, unstable NIC behavior, or unsupported VM device models, which can impact data collection, event correlation, and overall system stability. Therefore, the correct interpretation is that NetEco can be deployed onsupported/verifiedvirtualization platforms, not onanyvirtualization platform.
NEW QUESTION # 50
What are the colors of indicators on the LCD panel of the MDU?
- A. Red
- B. Yellow
- C. Orange
- D. Green
Answer: A,B,D
Explanation:
On Huawei UPS systems (such as the UPS5000 series), the MDU LCD panel includes status indicators designed to provide an immediate visual understanding of the UPS operating condition and alarm severity.
The indicator system usesthree standard colors:green,yellow, andred.Greenindicates the UPS is operating normally and the power supply path is healthy.Yellowis used to show abnormal conditions that require attention, such as warnings or non-critical alarms, where the UPS can typically continue supplying power but O&M personnel should inspect and handle the issue within the required timeframe.Redindicates serious or critical conditions, such as major faults or alarms that may threaten continuous power supply or require urgent action according to operating procedures. These three colors align with the common Huawei alarm severity presentation logic on the UPS display and help technicians quickly judge whether the situation is normal, warning-level, or critical-level without entering deeper menus.Orangeis not used as an MDU indicator color in this context.
NEW QUESTION # 51
The NetEco supports manual backup and automatic backup.
- A. True
- B. False
Answer: A
Explanation:
NetEco is a management platform that stores critical operational data, including site configuration, device models, user/role information, historical alarms, trend data, reports, and northbound integration settings. To protect these assets and ensure service continuity, NetEco provides a built-in backup mechanism that supports bothmanualandautomaticbackup modes.Manual backupis typically used before major operations such as version upgrades, configuration changes, northbound interface adjustments, or large-scale device onboarding, so engineers can create a restore point on demand.Automatic backupis used for routine risk control and is normally implemented through scheduled tasks, allowing backups to be generated at defined intervals to reduce data-loss exposure in case of hardware failure, system corruption, or accidental misconfiguration. In standard O&M practice, automatic backups are combined with retention policies (for example, keeping a rolling set of backup files), storage capacity checks, and periodic restore verification to confirm backup integrity. This dual-mode backup capability is a foundational requirement for stable long-term operation of management systems like NetEco.
NEW QUESTION # 52
The default port number for logging in to the NetEco is
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
In Huawei NetEco access design, the Web client is reached usingHTTPSto protect credentials and management data in transit. During initial deployment and commissioning, engineers access the NetEco login page by entering the server IP address followed by thedefault HTTPS service port. Huawei's standard login method specifies that users open a browser and enterhttps://NetEcoserver IP:31943to access the NetEco login interface. This port is therefore treated as the default Web login port in typical on-premises NetEco deployments, and it is the baseline value referenced in installation and login guidance. Other ports may appear in specific tools, customized scenarios, version variants, reverse-proxy deployments, or when security policy requires port changes, but those are exceptions driven by planning or product packaging. For exam and commissioning purposes, the correct default login port is the one used by the NetEco Web client entry point under the standard deployment model:31943.
NEW QUESTION # 53
Which of the following interfaces is used to connect the controller and the main control module of the unit?
- A. USB
- B. DP
- C. SW
- D. I2C/12v
Answer: D
Explanation:
In Huawei precision cooling units, the LCD controller (human-machine interface) must exchange real-time operating data and commands with the unit's main control module while also receiving a stable low-voltage power supply. This connection is typically implemented as alow-voltage communication bus plus DC power, which is why the interface is identified asI2C/12V. TheI2Cportion provides the data channel used for status display, parameter viewing/setting (within permission scope), alarm presentation, and command delivery (such as mute, reset, or control enable actions). The12 Vportion supplies power to the controller so it can operate independently of high-voltage power circuits and remain safe to access during routine O&M.
Interfaces likeDPandUSBare not used as the internal control link between the HMI and the main control board in this type of unit, and "SW" is not the designated controller-to-main-board interface in the standard wiring definition. Therefore,I2C/12Vis the correct selection.
NEW QUESTION # 54
ECO mode is not recommended when the load is less than
- A. 5%
- B. 10%
- C. 20%
- D. 30%
Answer: C
Explanation:
ECO mode is designed to improve UPS efficiency by supplying the load mainly through the static bypass path when the mains is within the acceptable quality window, while keeping the inverter synchronized and ready to take over quickly if power quality degrades. However, when the load istoo light, the overall operating characteristics of the UPS system are less favorable for ECO operation. At low load levels, the benefits of ECO in reducing conversion losses are smaller, and the system becomes more sensitive to frequent transfers caused by minor mains fluctuations, which can increase transfer##and operational risk. In addition, very light loads can reduce the effectiveness of system self-check behaviors and may lead to less stable operating margins for parallel systems, power modules, and downstream distribution, depending on site conditions.
Therefore, Huawei O&M guidance sets a practical threshold and states thatECO mode is not recommended when the load is lower than 20%, helping ensure stable operation, fewer unnecessary transfers, and better overall power supply reliability for critical loads.
NEW QUESTION # 55
Which O&M practice is most effective for identifying cooling inefficiency caused by airflow problems in an operating data center?
- A. Lower supply air temperature to the minimum possible value at all times
- B. Compare rack inlet temperatures, return air temperatures, and fan speed trends to detect recirculation and bypass
- C. Disable temperature sensors to prevent false alarms
- D. Run humidification continuously regardless of ambient conditions
Answer: B
Explanation:
Huawei facility O&M methods emphasize using monitored operating data to locate inefficiencies before they become faults. Airflow-related cooling inefficiency commonly appears as hot spots at rack inlets, elevated return air temperature fluctuations, abnormal fan speed increases, or uneven temperature distribution across aisles. By trending rack inlet temperature sensors alongside cooling unit supply
/return temperatures and fan speed or airflow commands, operations teams can distinguish between insufficient cooling capacity and poor airflow organization. Recirculation (hot air returning to rack inlets) often raises localized inlet temperatures without a proportional rise in room average temperature, while bypass (cold air short-circuiting back to returns) reduces cooling effectiveness and can drive fans to higher speeds unnecessarily. Data-driven checks support targeted corrective actions such as sealing cable openings, adjusting floor tile placement, restoring containment integrity, balancing airflow, or optimizing setpoints. This approach improves thermal stability, prevents overcooling, reduces energy waste, and aligns with Huawei's emphasis on integrated monitoring and closed-loop optimization for reliable, efficient operation.
NEW QUESTION # 56
In an in-room solution that adopts overhead air supply through air ducts, the net height of each floor must be greater than or equal to how many meters?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
For an in-room cooling solution that usesoverhead air supply with air ducts, sufficient vertical space is required to accommodate the ductwork, airflow distribution components (such as plenums, turning vanes, flexible connectors, and diffusers), cable trays/pipes that may share the overhead route, and the necessary maintenance clearance. If the net height is too low, the duct cross-section becomes constrained, which increases airflow resistance and static pressure, reduces delivered airflow volume, and can cause uneven air distribution. This leads to hot spots, higher fan power, and difficulty maintaining stable supply/return temperature control. In Huawei data center air-conditioning design guidance, overhead ducted supply is therefore matched with aminimum net floor height requirement of 4 m, ensuring ducts can be sized correctly for the target airflow, noise, and pressure limits while preserving safe installation and maintenance space. A 3 m net height is generally suitable for non-ducted in-room layouts, but becomes insufficient once full overhead ducting is introduced.
NEW QUESTION # 57
In a data center fire protection design, which approach best matches Huawei facility practice for protecting IT rooms while minimizing secondary damage to IT equipment?
- A. Disable automatic suppression to avoid accidental discharge
- B. Deploy a smoke detection system plus a clean-agent gas extinguishing system with interlock controls for automatic release
- C. Install a water sprinkler system as the only suppression method inside the IT white space
- D. Use only portable extinguishers and rely on manual response
Answer: B
Explanation:
Huawei data center facility design typically follows a layered fire protection concept: early detection, controlled alarm linkage, and suppression methods that protect equipment and ensure personnel safety.
A smoke detection system (often combined with staged alarms) provides early warning so operators can verify events and initiate emergency procedures. For the IT white space, a clean-agent gas extinguishing system is preferred because it suppresses fire without leaving residue and significantly reduces the risk of corrosion or contamination compared with powder-based agents. The extinguishing system is normally integrated with linkage/interlock controls: audible/visual pre-discharge alarms, time delay, emergency abort, door access control logic, and HVAC shutdown or damper control to help maintain agent concentration. This coordinated mechanism reduces false discharge risk while preserving a reliable automatic response if a real fire develops. In contrast, relying only on manual extinguishers is too slow for rapid fire growth, and water sprinklers alone can cause substantial collateral damage to servers and power equipment.
NEW QUESTION # 58
After installing the FusionCol8000-C (110-440 kW), inject water to preserve the pressure for the chilled water pipes to how many MPa. After 30 minutes, check that no leakage occurs. Preserve the pressure for 24 hours. If the pressure drop is less than 0.01 MPa and no leakage occurs, the pipes do not leak.
- A. 0.8
- B. 0
- C. 1.2
- D. 0.5
Answer: A
Explanation:
For FusionCol8000-C chilled-water systems, Huawei commissioning requires awater leakage/pressure- holding teston the chilled-water piping after installation to verify joint sealing, valve interfaces, and connection integrity before long-term operation. The specified method is toraise the water pressure in the chilled-water pipe to 0.8 MPa, then observe for30 minutesto confirm there is no visible leakage. If the system remains dry, the same pressure isretained for 24 hoursas a stability verification step. The acceptance criterion is that thepressure drop is less than 0.01 MPaover the 24-hour period and no leakage is found, which demonstrates that the piping and fittings meet tightness requirements under the prescribed test pressure. This procedure helps prevent future failures such as slow seepage, corrosion around joints, insulation waterlogging, and unexpected shutdowns caused by water loss or low differential pressure alarms. It also ensures that subsequent flushing, venting, and operational commissioning can be performed safely and reliably.
NEW QUESTION # 59
......
The Most In-Demand H20-923_V1.0 Pass Guaranteed Quiz : https://examtests.passcollection.com/H20-923_V1.0-valid-vce-dumps.html
